Most integrations can be connected directly through Power-ups in the Tibber app. Simply select the device you want to connect and follow the instructions.
Some integrations require a few extra steps. You may need a Tibber Bridge or have to check certain settings first.
For SAJ, you'll need a Tibber Bridge to connect your inverter. This integration supports the SAJ HS3.
What do I need?
- A Tibber Bridge, available in the Tibber Store of your market. Only one Bridge is supported per home.
- A SAJ HS3 inverter. Other SAJ models aren't currently supported.
- Modbus TCP enabled on your inverter.
- A 2.4 GHz Wi-Fi network that both your inverter and Bridge are connected to.
Connect your inverter
- Plug the Bridge into a power outlet and connect it to your 2.4 GHz Wi-Fi network.
- Open the Tibber app and go to Power-ups to connect your Tibber Bridge, if you haven't already.
- Go to Power-ups → Battery → SAJ and follow the instructions in the app.
Can't find SAJ in the list? Enable Tibber Labs under You → More → Tibber Labs → New Power-ups. Integrations in Tibber Labs are still in development and may be less stable.
If your inverter isn't found right away, try scanning again. SAJ sometimes requires two attempts.
What can I expect?
Once connected, a Battery and Solar gizmo will appear on your home screen. Live data updates every 10 seconds.
Keep your Tibber Bridge plugged in. Without it, Tibber can no longer control your system.
My inverter isn't found
First, try scanning again. If that doesn't work, check the following:
- Are your Bridge and inverter connected to the same 2.4 GHz Wi-Fi network?
- Make sure you're not using a guest network.
- Are you using Wi-Fi extenders or powerline adapters? These can prevent devices from discovering each other on your local network.
- Temporarily disable any VPNs or ad blockers.
- Check that your inverter and dongle firmware are up to date.
- Disable other energy management systems and AI modes. Your inverter can only be controlled by one system at a time.
- Restart your inverter and Tibber Bridge.
Still can't find your inverter? Select Manual connection in the Tibber app and enter your inverter's IP address.
Still can't connect?
Contact Tibber Support and include your inverter model number and the step where you're getting stuck.
For the details that apply to your country, select your market in the bottom-right corner of this page to visit your local Tibber Support Center.