All Collections
Smart home
Smart home
โ˜€๏ธ Netatmo - Weather Station ๐ŸŒฉ๏ธ
โ˜€๏ธ Netatmo - Weather Station ๐ŸŒฉ๏ธ

Nice designed Weather Station that communicates through WiFi.

Updated over a week ago

Netatmo Weather Station is a WiFi-connected Weather Station which gives you the opportunity to follow the weather and indoor climate from the phone. Weather Station is measuring temperature (indoor and outdoor) humidity, air pressure, CO2-level and sound level. The Weather Station can be used with Netatmo own app, and it can be connected to the Tibber app. If you have the Weather Station connected to Tibber, you will get the information directly in the app.

You can also combine Netatmo with extra accessories like indoor sensor, rain sensor, wind sensor, and smart steering of radiators.

You can order Netatmo from our store.

Netatmo Weather Station is easy to install, and takes just a few minutes:

1: Download the Netatmo Weather from App Store / Play Store-app.

2: Make sure that the phone / tablet is connected to WiFi in order to connect the Weather station.

3: Open the app and make a new Netatmo account, or use your existing account if you have one.

4: Connect the indoor module with the following power-cable, make sure that the light is blinking 3 times.

5: Activate bluetooth on your phone / tablet.

6: Press on the top of the indoor module until the light is blinking blue, and then press "next" in the app.

7: Follow the instructions in the app to finish the installation.

Did this answer your question?